Pre & Post Scans
There have been discussions about carmakers requiring pre & post scans when doing any repair work on their vehicles lately. “Scanning” means using a tool to read the vehicle’s On-Board Diagnostic (OBDII) computer.
The scan taps into the OBDII port under the driver side dashboard and flags “fault” codes that are tripped by things that cause problems for the vehicle. Dealerships, body shops and other repair facilities are already required to perform a pre-scan prior to beginning any repair procedure to make sure there are no undetermined issues to deal with, along with and a post-scan after the repair is complete to confirm the repair.
Vehicle technology built into the modern vehicle is categorized under two headings, safety related or performance related. Safety related technology is the most important. If safety related features are not performing properly, the repair facility is obligated to fix the problem. An example might be the Advanced Driver Assist Systems (ADAS). I say “might be” because it is still unclear if ADAS is an “assist” system or a “safety” system.
Some safety systems are noticeable to the driver via lights, sounds, and warnings that pop up on the dash or fill the cab with audible warnings. Others are intertwined with other systems that are read by the scan of the vehicle and are not obvious to the driver. The carmaker wants to make sure the vehicle owner has the most current safety technology up and working correctly. Directing and requiring scans help assure the safety of occupants in the vehicle.
The other scanning requirement is of performance related technology. Vehicle owners spend thousands of dollars to have the latest in performance features and expect them to be in working order. When an owner enters a repair facility, they expect their vehicle to be in the same working order as when it arrived at the repair shop. Pre & post scans assure the customer of that expectation.
What does this have to do with auto glass? Our challenge is to step up. This new technology has reached our industry through our connection to ADAS and with other glass related systems. We must rise to the level of professionalism of our sister industries.
More and more auto repairers pinpoint systems that are not operating properly through a pre-scan process. They then deliver that vehicle back to the owners, with all of the systems repaired and operating at peak performance and safety; which are documented through the post-scan process. Our industry cannot be any less of a service provider.
There are dozens of scanners available to the professional and consumer and can range from under $100 to thousands. Each scanner offers different levels of performance from superficial readings for the car owner to global scans that professionals use to diagnosis complex systems.
My advice – do your homework and determine the scanner that will fit the needs of your shop. Purchase and use it on every vehicle. When an issue shows itself, determine if you have the ability and equipment to repair the problem. If not, inform the customer of the issue and suggest a repair by a professional that can complete it.